L-line

L-35


Overcome the limitations of space: With the L 35, line arrays can also be set up in low-ceilinged rooms. Unobtrusive! And still sounds like a rocket launch.


The L 35 is loud. Especially when its lightweight construction is taken into account: The 2-way speaker weighs an astounding 3.6 kg. Yet, the 2-way speaker is as small as the mission description in the flight manual. And all that with a weight of just 3.6 kg! At the same time, this system boasts an incredible 129 dB max. SPL. This is a respectable figure even for significantly bigger systems.

L 35 means tangible savings: More space in the shuttle. Weightless assembly. Save time while rigging. For all that, a skeleton crew will be sufficient. At the same time, the L 35 always provides more than enough power. In proportion to its weight, it reaches an incredible 35.8 dB/kg.

Because the L 35 is so handy and visually discreet, it is as clever in live situations as in installations. And another plus: Vertically, its compact construction allows for more angles.

Few others feature a comparable power with so little space requirements. With its numerous mounting options and the comprehensive range of accessories, the L 35 can be installed almost anywhere and speeds up the assembly as well as the flight home.

Max. configuration:
1x LA 10.4D (4 ch mode)
12x L 35 (6 pcs/ ch)



Features


Internal values



Ultra-compact line array with a robust front panel made of die-cast aluminium. Two powerful 3.5-inch neodymium drivers. 1-inch compression driver. A solo device providing a 123 dB sound pressure – with excellent sound reproduction.



Quick to assemble



Save valuable time! Despite its two 3.5” woofers, its 1” compression driver and the rig, the L 35 line array weighs only an astounding 3,6 kg. Being a small size and a flyweight will save space in transport and protect your back. Build quickly with fewer staff!



Light-weight



3,6 kg in total weight simply means that you will never again need to worry about the statics. That many L 35s already grind on the floor before they would be too heavy for a rig.



Sparkly and new for the outdoors



The L 35 line array is available in black and white. The Outdoor versions are also protected with a grille. Thus, the speakers and housing are securely covered. If required, covers can be fitted for cable connections as well.


Specifications




L 35 Drawing




Model:L 35
ACOUSTICAL
Frequency range (-3dB)*110 Hz – 18 kHz
Frequency range (-10dB)*:95 Hz – 19 kHz
Coverage angles (-6dB) [H x V]:100° x 20°
Nominal impedance:16 Ω
Sensitivity **:91 dB
Peak power:400 W
Continuous power ***:100 W
Maximum Peak SPL ****:129 dB
System type:2-way passive system
2-way passive system2.2 kHz
Transducers:LF: 2 x 3.5″ drivers
MHF: 1″ compression driver
Enclosure type:Vented box
Connectors:Input signal: 1 x Neutrik speakON® NL4
Link output: 1 x Neutrik speakON® NL4
Wiring:Input signal: switchable 1+/1- or 2+/2-
Link output: 1+/1- and 2+/2-
MECHANICAL
Product dimensions [H x W x D] (Including rigging):131 x 312 x 234 mm
Net weight:3.6 kg
Packaging dimensions [H x W x D]:225 x 415 x 311 mm
Total weight:4.7 kg
Cabinet:12 mm plywood with die-cast aluminium front
Cabinet finishing:Black or white polyurea coating
Grille:Powder coated perforated steel
Rigging:Three-point rigging system: two front and one rear 6 mm SE Audiotechnik® locking pins.
Stacking:Two-point SE Audiotechnik® stacking system
Splay angles:0º, 2.5º, 5º, 7.5º, 10º
ACCESSORIES
Bumper frame:L35 BF / L35 BF W
U-bracketU-bracket
Stacking frame for B15 subwooferB15 SFi L35
Stacking frame for B18 subwooferB18 SFi L35
Pole barSPS20
All product specifications are subject to change without prior notice.* Measured with IA 402D amplifier and 2L35 preset
** Whole space, 1W / 1m, on axis
*** According to EIA-426B Standard (based on RMS Voltage)
**** For 4 units measured with IA 402D amplifier and 4L35 preset + 12 dB Crest Factor


Accessories


L 35 BF



The L 35 BF universal bumper frame can be used for hanging, ground stacking or together with a pole.



L 35 UB



The L 35 UB U-bracket allows to stack up to four L 35 units and, with the SPS 20 pole mount, attach it to any subwoofer with M20 thread.



SPS 20



M20 Pole Support to pole mount an M-F3A or M-F3A PRO on any subwoofer.