Ground Control to Major Tom: With the L 65, you’ll make a safe landing! Our passive 3-way line array is a reliable all-rounder for light and sound rental companies, professional bands and fixed installations with high level requirements. With an SPL of 137 dB at a weight of less than 23 kg, the sound is galactic, without tearing black holes in the cash register.

The rigging is easy – because of its simple suspension and low weight in relation to its performance. Thus you can dock anywhere quickly.

For thunderous sound like that of a rocket engine, SE Audiotechnik uses a passive 3-way system in the L 65 with a value for money that is out of this world.

The three drivers provide for an assertive, neutral sound through the entire frequency range – the ideal launch pad for exciting space manoeuvres. Thanks to the passive construction, up to three L 65 can be used on a 4Ω channel power amplifier. This is a massive saving on amplifiers!

We developed the L 65 in Germany and manufacture them in our own factory. Therefore, all components are matched to one another precisely and deliver maximum sound pressure with minimal distortion.

Since we do not outsource our production, we also retain full quality control. Therefore, our clients get more for less.

With their tough outer skin, low weight and fast assembly and disassembly, the L 65 is the ideal tour companion. It is not cumbersome to transport and represents a wonderful starting point in the mix.

Its homogeneous sound characteristics can perfectly combine with other elements of the L-Line. And treat yourself to the flying bass L 65 FS to round it off.

Max. configuration:
1x LA 10.4D (4 ch mode)
12x L 65 (3 pcs/ ch)


Homogeneous directivity

It continues beyond the horizon… The symmetrical layout generates a wonderfully homogeneous horizontal coverage!

Passive crossovers

The L 65 will save you from buying additional amplifiers: With the L 65‘s passive crossovers, fewer amplifier channels are required.


Optimised throughout the entire frequency range. Each driver is automatically assigned its frequency range without being overloaded.

Easy to combine

The L 65 can be easily combined with our series. It is half as tall as the L 65 FS and twice as tall as our compact L 35. This enables easy integration into existing systems.


L 65 Drawing

Model:L 65
Frequency range (-3 dB):95 Hz – 17.5 kHz
Frequency range (-10 dB):60 Hz – 18 kHz
Coverage angles (-6dB) [H x V]:100° x 20°
Nominal impedance:16 Ω
Sensitivity *:98.6 dB
Peak power:1000 W
Continuous power **:250 W
Maximum Peak SPL ***:137 dB
System type:3-way passive system
2-way passive system2.2 kHz
Crossover frequency:MF: 400 Hz
HF: 1.8 kHz
Transducers:LF: 2 x 6.5″ woofers
MF: 4 x 3.5″ drivers
HF: 2 x 1″ compression drivers
Enclosure type:Vented box
Connectors:Input / Link signal: 2 Neutrik speakON® NL4
Wiring:Pins 1+/1- : drivers
Pins 2+/2- : link signal, pins 1+/1-
Product dimensions [H x W x D] (Including rigging):237 x 766 x 383 mm
Net weight:22.7 kg
Packaging dimensions [H x W x D]:363 x 810 x 480 mm
Total weight:25 kg
Cabinet:12 mm plywood
Cabinet finishing:Black or white polyurea coating
Grille:Powder coated perforated steel
HardwareTwo side handles in plywood embedded in cabinet
Two rear heatsink panels
Rigging:Four-point rigging system: two front and two rear 8 mm SE Audiotechnik® locking pins
Splay angles:0º, 1º, 2º, 3º, 4º, 6º, 8º
Stacking:Two-point SE Audiotechnik® stacking system
Bumper frame:L65 BF / L65 BF W
L35 Under frame adapter:L65 UFB
All product specifications are subject to change without prior notice.* Whole space, 1W / 1m, on axis
** According to EIA-426B Standard (based on RMS Voltage)
*** Max Peak SPL = Sensitivity + 10log10(Continuous Power) + 12 dB Crest Factor


L 65 BF

The L 65 Bumper Frame can be used to hang or stack L 65 and L 65 FS.

L 65 UFB

The L 65 Under Frame Bar can be used as an adapter to hang L 35 under L 65.