CV-212 전면
CV-212 후면

FULL RANGE

CV-212   


The CV 212 is a powerful yet compact 2-way passive loudspeaker, designed to fulfill the most demanding requirements in a wide range of PA, monitoring and installation applications.


Two 12” woofers mounted in a fine-tuned vented housing, generate twice SPL levels over the lower frequencies, while keeping ample headroom for maximal performance. In addition, a 1.4″ compression driver with horn covers the mid and high frequencies for defined reproduction across the entire audible frequency range. With a continuous power handling of 800 W, this speaker is capable of delivering high quality sound with a wide dynamic range up to a maximum sound pressure level of 135 dB.


The CV 212 is equipped with a rotatable horn that allows the vertical and horizontal coverage to be swapped. The two speakON® NL4 connectors simplify cabling and signal distribution. In addition, the special housing design offers various set-up options and orientations. Handling and installation is as easy as it is safe thanks to the ergonomic handles, the 14 M10 flying points, the lower M20 pole thread and the special CV 212 UB U-bracket.

From touring events to theaters and houses of worship, either as a floor, standing or suspended sound system, many venues and applications benefit from this exceptional loudspeaker. CV 212 can be expanded with SE subwoofers such as CV-118, CV-218, B 18 or B 21.


Specifications




CV 212 Drawing




Model:CV 212
ACOUSTICAL
Frequency range (-3 dB)*:100 Hz – 15 kHz
Frequency range (-10 dB)*:50 Hz – 16 kHz
Coverage angles (-6dB) [H x V]:90° × 60°, HF-horn rotatable
Nominal impedance:4 Ω
Sensitivity*:100 dB
Peak power:3200 W
Continuous power**:800 W
Maximum Peak SPL***:141 dB
System type:2-way system
Crossover frequency:1.15 kHz
Transducers:Coaxial driver with:
LF: 2 x 12″ driver (3″ voice coil)
HF: 1.4″ compression driver (3″ voice coil)
Enclosure type:Vented box
Connectors:Input signal: Neutrik speakON ® NL4
Link output: Neutrik speakON ® NL4
Wiring:Pins 1+/1- : drivers
Pins 2+/2- : link signal to pins 1+/1- of THRU output
MECHANICAL
Product dimensions [H x W x D] (Including rigging):1017 x 380 x 388 mm
Net weight:35 kg
Packaging dimensions [H x W x D]:1123 x 480 x 485 mm
Total weight:38 kg
Cabinet:15 mm plywood
Cabinet finishing:Black polyurea coating
Grille:Powder coated perforated steel
Hardware:Two side plastic cup handles
Four bottom rubber feet
14 x M10 threads for hanging: 3 on top, bottom and sides, and 2 on the rear.
ACCESSORIES
Pole bar:SPS20
U-bracket for truss hanging:CV 212 UB
Transport cover:SMX 12TC
All product specifications are subject to change without prior notice.* Half space, 1W / 1m, on axis
** According to EIA-426B Standard
*** Max Peak SPL = Max. Cont. SPL (Cont. Power / 1m) + 12 dB Crest Factor


Related Products